Ultra Compact and Reliable
Retail hardened computers need to be both compact and reliable, as they often are used for mission critical applications and not placed in an office environment. The patent-pending LC6000 provides unparalleled reliability by being an all solid state unit - all components reside on one PCB board and no moving mechanical parts are used. The hard drive, for example, is a solid state flash drive. In addition, the computer is enclosed in a rugged zinc die cast case for extra protection. The LC6000 has a very compact form factor - only 1.0"H x 6.3"W x 5.1"D. Two mounting brackets enable these modules to be mounted almost anywhere - on a wall, ceiling, table top or under a counter.

Intel-Compatible and Versatile
The LC6000 is Intel-compatible, so it can run many Windows and Linux-based applications. This enables the unit to be used in a wide variety of applications - in a restaurant's kitchen system, in an auto ID workstation, etc. The LC6000 provides a compliment of up-to-date I/O ports - Ethernet, USB, serial, PS/2 keyboard/mouse and SVGA. The Ethernet port allows full access to internet, file transfer, and system networking. The USB port enables the LC6000 to drive a multitude of peripheral devices and install a wide range of application software.

Low Cost
As PC manufacturers build computers designed for gaming and multimedia applications, the multi-gigahertz processors and large hard drives add costs that are not needed for most industrial applications. The LC6000, designed specifically as an industrial computer, provides the computer power needed for most applications at a fraction of the cost of standard PCs.

Fanless and Reliable
Retail hardened computers need to be reliable, as they often are used for mission critical applications and not placed in an office environment. The Logic Controls LC7000 provides unparalleled reliability by being a fanless unit. It is an ideal computer for use in harsh environments with high levels of dust or oil or when fan noise is not desirable. For enhanced reliability, LC7000 uses no internal cables and mechanical moving parts such as hard disk drives. For extra harsh enviromental protection, special PCB protective coating is used to resist high humidity and moisture condensation.

Ultra Compact and Rugged
LC7000 has a compact form factor – only 1.17”H x 6.50”W x 4.96”D. Two mounting brackets enable these modules to be mounted almost anywhere – on a wall, ceiling, table top or under a counter. For minimum foot-print, the LC7000 module can be mounted vertically. The computer is housed in a rugged die cast case for extra protection.

Full Compliment of I/O Ports
The small LC7000 computer provides a very impressive compliment of up-to-date and legacy I/O ports. 4 USB 2.0, DVI/VGA, Ethernet, serial, keyboard/ bump bar, and speaker ports are all available externally. LC7000 uses high performance processors, so it can run Windows and Linux-based graphics and video applications. Whether your application runs on Windows Vista, Windows XP, Windows XP embedded, Windows 2000, Windows CE or Linux, your operating system needs are supported by LC7000.

Fanless and Reliable
Retail hardened computers need to be reliable, as they often are used for mission critical applications and not placed in an office environment. The Logic Controls LC8200 provides unparalleled reliability by being a fanless unit. It is an ideal computer for use in harsh environments with high levels of dust or oil or when fan noise is not desirable. For enhanced reliability, all of the computer components and connectors reside on one PC board. LC8200's single board computer limits the number of internal cables, a common source of loose connections and failures. A true no-moving-part operation is provided when compact flash is used for mass storage or boot-from-network configurations are employed.

Ultra Compact and Rugged
LC8200 has a very compact form factor – only 2”H x 8”W x 6”D. Two mounting brackets enable these modules to be mounted almost anywhere – on a wall, ceiling, table top or under a counter. The computer is housed in a rugged die cast case for extra protection.

Full Compliment of I/O Ports
LC8200 also provides a very impressive compliment of up-to-date and legacy I/O ports. Up to 4 serial, 4 USB 2.0, 1 VGA, 1 parallel, 1 ethernet, 1 PS/2, microphone and speaker ports are all available. Hence industrial applications that require serial or parallel interfaces are fully addressed. The LC8200 also uses Intel-compatible, Pentium-class processors, so it can run Windows and Linux-based applications. Whether your application runs on Windows XP, Windows XP embedded, Windows 2000, Windows CE or Linux, your operating system needs are supported by LC8200. This enables the unit to be used in a wide variety of applications – in a restaurant’s kitchen system, in a POS workstation, in an auto ID workstation, etc.

Fanless and Reliable
Retail hardened computers need to be reliable, as they often are used for mission critical applications and not placed in an office environment. The Logic Controls LC8600 provides unparalleled reliability by being a fanless and ventless unit. It is an ideal computer for use in harsh environments with high levels of dust or oil or when fan noise is not desirable. For enhanced reliability, all of the computer components and connectors reside on one PC board. The LC8600’s single board computer limits the number of internal cables, a common source of loose connections and failures. A true no-moving-part operation is provided when compact flash is used for mass storage or boot-from-network configurations are employed.

Ultra Compact and Rugged
The LC8600 has a very compact form factor – only 2”H x 8”W x 6”D. Two mounting tabs enable these modules to be mounted almost anywhere – on a wall, ceiling, table top or under a counter. For minimum foot-print, the LC8600 can be mounted vertically. The computer is housed in a rugged die cast case for extra protection.

Full Compliment of I/O Ports
The LC8600 provides a very impressive compliment of modern and legacy I/O ports. Up to 4 serial, 7 USB 2.0, 1 VGA, 1 DVI-I, 1 parallel, 1 Ethernet, PS/2 keyboard and mouse, microphone and speaker ports are all available. Hence industrial applications that require serial or parallel interfaces are fully addressed. The LC8600 also uses Intel high performance processors, so it can run all Windows and Linux-based graphics and video applications. Whether your application runs on Windows Vista, Windows XP, Windows XP embedded, Windows 2000, Windows CE or Linux, your operating system needs are supported by the LC8600. This enables the unit to be used in a wide variety of applications – in a restaurant’s kitchen system, in a POS workstation, in an auto ID workstation, etc.